Eleaf BASAL Vaporizer Review Background

Eleaf Basal 30W Kit is the brand new starter kit from Eleaf. Featuring the all-metallic finish with the unique process, it is the fashionable ultra-thin kit that easy to use and carry to go device. This Basal kit was sent to me for the purposes of this Eleaf Basal Vaporizer Review. This will not in any way, cause me to give this mod a favorable review or influence my opinion in any way.

How it is packaged

The box has two tiers. It has a foam insert on the top where you will find the mod and tank. When you remove the foam insert; you will find the instruction manuals, the USB cord and coil (1.5 ohms) also will have the spare parts that will include the drip tip. The 0.75-ohm coil comes installed in the tank. It is the Standard Eleaf packaging.

In the box

• 1 × Eleaf BASAL Mod
• 1 × Eleaf GS GASAL Tank
• 1 × 0.75ohm GS Air Coil
• 1 × 1.5 ohms GS Air Coil
• 1 × QC USB Cable
• 2 × User Manuals
• Spare Parts

First Impression Eleaf BASAL Vaporizer Review

The Eleaf Basal is compact All-in-One Voltage Wattage mod with a 30 Watts of power. It has a 1500mAh internal battery, 2A quick charge (The USB port, for some reason it is on the bottom of the device. You have to charge it when laying it down). It has a metallic and clean finish, very thin and is made for MTL vaping. You can choose Voltage, Puff, Time and a bigger battery bar on the display. It also includes a stealth mode. The GS Basal tank has a refined airflow that allows you to dial in your desired air flow, using a series of holes and a slot for the air flow. It holds up to 1.8ml of juice. It uses the GS Air coils.

Tank

The tank is consist of four (4) pieces: Mouthpiece, Tank Section, GS Air Heat, and Atomizer Base. The glass is tinted to match the color of the mod and has Eleaf GS Basal printing on it. It has an airflow system that utilizes both a wide airflow slot as well as a series of tiny air holes. To fill the tank you unscrew the base of the tank and fill. You also change coils the same way. When first setting up the tank you will see there is no drip tip, it is packed in the bag of spare parts. There was no leaking noted during my time using this, once you install the base it seals everything up nice and tight.

Coils

The GS Basal tank uses the GS air coils. It comes with 0.75ohm (installed) with a rating of 8 – 25W and a 1.5-ohm coil rating of 8 – 20 W. I used both and both were flavorful. I found right around 16.3W while using them on this mod. It took a tank or two for these coils to fully break in, that is pretty quick considering it is a 1.8ml tank.

Performance on the Eleaf BASAL Vaporizer Review

It is a real classy looking mod. Even though it is only a 1500mAh battery you get good battery life. I was staying at 16.3W and it lasted all day. Charging only took just over a half an hour. I like the fact that you get to dial your watts in where you the user like it. True it is only 30W but that is plenty for this set up. It is not meant to be a high wattage, big cloud machine. You get good flavor with this tank and the coils are very affordable. This is an MTL device, so thinner juice worked the best, however, I did throw a tank of 70/30 in and experienced no problems while vaping. IMO Eleaf did a nice job with the Basal thinking of the MTL crowd and of the beginner wanting to stop smoking. It is very classy looking and you have an easy interface so not to confuse a beginner and yet are able to really dial in your watts and Air flow exactly where you want them.

Overall

The Basal Vaporizer Kit by Eleaf is a starter kit that gets the job done. It’s slim, it’s pocketable, it’s easy to use with no overwhelming options, and it’s meant to be used by people who want to switch to vaping. That is the sole purpose of this device.